Training Material & Publications

In addition to copies of the classroom theory training material we also have a publication used in our Vibration Analysis and Condition Monitoring Training.

Enhancing System Reliability Through Vibration Technology

ISBN: 978-1-5272-5386-5

This technical reference book comprises of over 19 years’ experience in the fields of Vibration Analysis, Condition Monitoring and Reliability Engineering. It is written with the technical tradesperson in mind, interpreting Vibration principles into layman’s terms.

All data is from real-life situations with 20 case studies throughout the book. This is to be used as material to help support knowledge sharing, practical training and mentoring to enhance System Reliability though Vibration technology

This publication comes as an A4 300 page Paper Back printed in full colour on 120gsm paper.

Book Content:

  • Part 1: Introduction to Condition Based Maintenance
  • Chapter 1 – Condition Monitoring
  • Chapter 2 – Mechanics of Failure
  • Chapter 3 – Condition Monitoring Technologies
  • Part 2: Condition Monitoring Management Processes
  • Chapter 4 – Setting up and Reporting
  • Chapter 5 – Practical Application
  • Chapter 6 – ISO Standards 
  • Part 3: Vibration Analysis Condition Monitoring Techniques
  • Chapter 7 – Vibration Units 
  • Chapter 8 – Accelerometer Selection and Mounting
  • Chapter 9 – Signal Processing 
  • Chapter 10 – Bearing Condition Units 
  • Chapter 11 – System Dynamics 
  • Chapter 12 – Resonance & Natural Frequencies
  • Chapter 13 – Operating Deflection Shape Analysis
  • Chapter 14 – Motion Amplification
  • Chapter 15 – Modal Analysis 
  • Chapter 16 – Orbit Plot 
  • Chapter 17 – Bode Plots 
  • Part 4: Performing Vibration Analysis  
  • Chapter 18 – General Vibration Analysis  
  • Chapter 19 – Rolling Element Bearings 
  • Chapter 20 – Fluid Film Bearings 
  • Chapter 21 – Gears        
  • Chapter 22 – Paper Machines    
  • Chapter 23 – Jaw Crushers    
  • Chapter 24 – Vibrating Screens 
  • Chapter 25 – DC Drives 
  • Chapter 26 – AC Drives 
  • Chapter 27 – Electrical Discharge Machining (EDM)       
  • Chapter 28 – Pumps       
  • Chapter 29 – Compressors    
  • Chapter 30 – Reciprocating Engine Vibration   
  • Chapter 31 – Turbo Machinery Notes 
  • Part 5: Balancing  
  • Chapter 33 – Balancing   
  • Part 6: Appendix 203
  • Chapter 34 – Case Studie

The costs for this book of gold is £45.00 plus postage and packaging from the UK.

Please complete the form below with your location, question or number of copies required and we will respond with the costs for postage and packaging.